Donut Robot® Features Summary Click on any feature heading (in red) for an explanation of that feature.

Standard (non-GP) Models

	MARK 1	MARK 2	GAS MARK 2	MARK 5	MARK 6
ELECTRIC HEAT	Yes	Yes	X	Yes	Yes
GAS HEAT	X	X	Yes	X	X
FRYING TIME RANGE (SEC.)	50-450s	50-450s	50-450s	50-450s	50-450s
FRYING TIME CONTROL	4 settings	Dial	Dial	Dial	Dial
DEPOSITOR TYPE	Donut Robot	Donut Robot	Donut Robot	Donut Robot	D.R. or Type F
DEPOSITOR CAPACITY	15lbs (7 kg)	15lbs (7 kg)	15lbs (7 kg)	15lbs (7 kg)	15lbs (7 kg)
DONUTS PER ROW	1	2	2	2	2-5
PRODUCTION AT 95-SEC FRY TIME	13 doz/hr	42 doz/hr	42 doz/hr	56 doz/hr	112 doz/hr
MINIDONUT CONVERSION KIT	Optional	Optional	Optional	Optional	Optional
CONVEYOR ROW SPACING	3.75" (95mm)	3.75" (95mm)	3.75" (95mm)	3.75" (95mm)	3.75" OR 4.5" (95/114mm)*
DRAIN AND VALVE	X	Optional	X	Optional	Standard
FEED TABLE	X	Optional	X	Optional	Optional
VENTLESS (INSIDER)	X	Yes	X	Yes	X
EXTRA TURNERS	X	X	X	X	Optional
SUBMERGER	X	X	X	X	Optional
AUTOMATIC PROOFER	X	X	X	X	Optional

 

Explanation of Features

• ELECTRIC HEAT: Donut Robots feature a heavy-duty, high-efficiency element shaped to maintain optimum temperature through the length of the fryer. Element tilts upward for easy cleaning. Thermostat range is up to 425°F / 218°C.
• GAS HEAT: Propane heating is available on Gas Mark 2 and Gas Mark 2 GP only. Thermostat range is up to 425°F / 218°C.
• FRYING TIME RANGE: Minimum-maximum fry times for each model.
• FRYING TIME CONTROL: All models except Mark 1 are controlled with fry-time dial.
  Mark 1 fry-time adjusted by choosing from 4 drive-belt settings (easily changeable).
• DEPOSITOR TYPE:
  Standard Donut Robot depositor makes 5 varieties with compatible plungers.
  Type F makeS up to 10 varieties with compatible plungers.
  GP models make mini-donuts only, using double-miniature hopper and double-miniature 1-inch plunger.
  See individual models for which varieties each model can produce.
• MINI-DONUT CONVERSION KIT: The conversion kit doubles the output of the standard Donut Robot depositor when producing minidonuts. Consists of a double-miniature hopper with double-miniature 1-inch plunger. Deposits 4 donuts per row (except Mark 1 - two per row). Also known as "double-miniature conversion kit".
• DONUTS PER ROW: Standard models deposit 2 cake donuts per conveyor row (except Mark 1 - one donut per row). GP models deposit 4 mini-donuts per conveyor row (except Mark 1 - two per row). To double the production rate of minidonuts on standard models, use the mini-donut conversion kit.
  Mark 6 with Donut Robot depositor produces 2 donuts per row. Mark 6 with Type F depositor accomodates 4-5 per row. Mark 6 with raised donuts: 4 per row.
• PRODUCTION AT 95/60 SEC FRY TIME: Number of donuts produced per hour at the frying time specified (your production rate may vary).
• CONVEYOR ROW SPACING: Donuts are conveyed through fryer by flight bars. Conveyor row spacing refers to the distance between flight bar centers. Flight bars are 1/4" diameter; subtract this from row spacing to obtain clear space between bars.
• Note: Mark 6 is available with 4.5 in spacing as an option.
• GP MODEL ROW SPACING: Spacing for GP models. Donuts are conveyed through fryer by flight bars. Conveyor row spacing refers to the distance between flight bar centers. Flight bars are 1/4" diameter; subtract this from row spacing to obtain clear space between bars.
• MINIDONUTS PER ROW: For GP models, this is the number of mini-donuts deposited per conveyor row.
• DRAIN AND VALVE: Heavy-duty drain and valve combination at the bottom of the fryer. It extends about 20"/51cm below the fryer and needs a hole in the table or counter below the fryer. If you have no room for the drain, you can extract and filter shortening using Belshaw's Filter-Flo Siphon. The drain can be cut to a minimum of 12"/30cm. Gas Donut Robots cannot operate with a drain.
• FEED TABLE: Essential for making yeast-raised donuts on Donut Robots. The feed table automatically inserts donuts into the fryer. For details, see Mark 2,5 and 9 accessories or Mark 6 accessories.
• EXTRA TURNERS: Mark 6 and Mark 9 can have 1, 2, or 3 turners with this option, which enables even frying of French Crullers and other varieties. A specialized conveyor is required to accept the turner. The operator can revert to a single turner in about one minute.
• SUBMERGER: Mark 6 is available with submerger for even frying of donut balls (sometimes known as 'holes' and other names). Ask your sales representative for details.
• VENTLESS (INSIDER): The Insider can house Mark 2, Mark 2 GP, Mark 5 and Mark 5 GP. For details, see Insider.
• AUTOMATIC PROOFER: The Mark 6 system is compatible with Belshaw's TMK-VI automatic proofer for convenience and labor saving.