PRF-2021 is a full featured single door proofer designed for use independently or alongside Belshaw Adamatic's OVEN-2010 and OVEN-2020 Rack Ovens. PRF-2022 is designed, manufactured and serviced entirely in USA.
STANDARD FEATURES
- Holds 1 double baking racks, or 2 single racks
- Fully regulated heat and humidity system
- Touch screen control panel
- 2 independent countdown timers
- Indicator light showing when proofer is in use
- Hi-temperature safety switch
- LED interior lighting
- No-ramp design for fastest load/unload
- 90.25" overall height - suitable for locations with ceilings 102.25" or above
- Durable construction, stainless steel throughout.
- Knock down shipment for on-site assembly
- Proofer ships with separate panels fastened with cam lock system
- 1 year parts and labor warranty
- Certified by UL for safety & sanitation
- Designed, manufactured and serviced in USA
TOUCH SCREEN FUNCTIONS
- Independent countdown timers for each rack, enabling bakers to monitor progress exactly at all times
- Color coded indicators to show whether actual temperature/humidity are above or below set points
- Energy saving mode, engages automatically after 60 minutes of inactivity. Timing can be adjusted.
- Specific heat, humidity and timing settings may be selected in settings screen – or retain factory defaults
- Convenience functions such as Reset and Pause Timer, to allow for exact timing of each rack insertion
- Auto-ON and Auto-OFF available for every day of the week
DIMENSIONS (INSTALLED)
- 40” Overall width
- 60” Overall depth, includes overhang
- 85¼” Overall depth, with doors open
- 92¼” Overall height
- 32½” Door width, each door
- 40” x 60" Footprint, doors closed
- 40” x 84¼" Footprint, doors open
CLEARANCES
UTILITIES
Power
- 208 - 240V, 60 Hz, 3-phase
- 5.3 - 7.1 KW
- 15.5 - 17.8 Amps
Water
- ½" NPT with filter, 30 psi minimum, 83" above floor
- Water should be 2–4 grains/gall hardness, 7–8 pH, 0–30 ppm chlorides
- Drain 1/2" NPTM, 3" above floor
Heat / Humidity Range
- Maximum Heat setting 110° F (43.3° C)
- Minimum Heat setting 70° F (21.1° C)
- Maximum Humidity setting 90% Relative Humidity
- Minimum Humidity setting 40% Relative Humidity
Installation
- Installation must be carried out or supervised by factory authorized technician.
- Proofer must be mounted on floor of non-combustibe construction and material according to NFPA 54.
- Floor should be level to within 3/4" under oven.
- Slope should not exceed 1/8" per foot in any direction
- 104¼" ceiling height recommended to allow better access to services
- Note: OVEN-2010/2020 minimum recommended ceiling height is 130"
- Customer is responsible for utility connections to comply with applicable codes