Skip to main content
original-223-631-belshaw_thermolizer_tz-6
original-223-632-belshaw-thermolizer-close
original-81-624-belshaw_mark5system
original-125-627-ep18-24-mk2-2

Got questions?

Use our Quick Contact form and we'll provide you with answers. 

TZ6 Proofer

Smaller 6-shelf proofer for use with Donut Robot® Mark II systems running below full capacity.

With 2 doors and 6 shelves, this alternative to the EP18/24 proofer works well with Donut Robot® Mark II Cake and Raised Systems. It is not large enough for a Mark II system running at full capacity, but it will work very well for a Mark II system running batches of 12 dozen yeast raised donuts at a time. 

  • Access is by 2 individual doors, so you can insert or take out Proofing Trays/Cloths one at a time. 
  • Doors are plexiglass, so you can easily see how donuts are progressing. 
  • Temperature and humidity can be regulated, each by a simple dial.
  • TZ6 is mobile on casters and can be used as an extra working surface, or as a support for a Mark II Feed Table. (see photo of Mark II system alongside)

For EP18/24 proofer, see 'Related Products' below.

Full Capacity @30 minutes proofing time

Approx 24 dozen donuts/hour

Full Capacity @45 minutes proofing time

Approx 16 dozen donuts/hour

Compatibility

Worldwide

Certification

UL, CSA, NSF, CE

  • The capacity of a Donut Robot® Mark II Cake and Raised System is 30 dozen donuts/hour.
  • The capacity of the TZ6 is 15 dozen donuts per hour @ 45 minutes proofing time.
  • This means that you can use the TZ6 with a Donut Robot® Mark II Cake and Raised System, but there will be a gap of about 20-30 minutes between each batch of 12 dozen yeast raised donuts that you proof in the TZ6.
  • You can use this time to make cake donuts. 
  • If you plan to operate your Mark II at full capacity for yeast raised donuts with no gaps, you can choose the EP18-24 proofer (see "Related Products" below). The capacity of the EP18-24 is approximately 45 dozen donuts per hour @ 45 minutes proofing time.
  • When used with Donut Robot® Mark II, the narrow Proofing Trays will need extra support inside the TZ6 for proofing. 
  • Support can be provided by a 15 x 25 inch glazing screen on each shelf. 
  • This is shown in one of the photos above, with 2 Proofing Trays side by side. 
  • Glazing screen Part # is Belshaw #SL200-0004 (see "Related Products" below).